PLC-OPIT-230UC/ 24DC/2

Extract from the online catalog     PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368   PLC interface, consisting of PLC-BPIT basic terminal block with PushIn Technology and plug-in miniature optocoupler, for mounting on DIN rail NS 35/7,5, input: 230 V AC/220 V DC, output: 3 - 33 V DC/3 A   Product notes WEEE/RoHS-compliant since: 17/11/2009 Commercial data EAN 4 046356 506830 Pack 10 Customs tariff 85364900 Country of Origin DE Catalog page information Page 85 (IF-2011) Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http:// www.download.phoenixcontact.com. The General Terms and Conditions of Use apply to Internet downloads. Technical data Input data Nominal input voltage UN 230 V AC (220 V DC) 220 V DC Input voltage range in reference to UN 0.9 ... 1.1 Switching threshold "0" signal in reference to UN ≤ 0.3 PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 1 / 6 18-Nov-2011 PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368 Switching threshold "1" signal in reference to UN ≥ 0.8 Typical input current at UN 3.5 mA Typical response time 4 ms (at UN) Typical turn-off time 7 ms (at UN) Operating voltage display Yellow LED Type of protection Bridge rectifier Protective circuit/component Bridge rectifier Transmission frequency 10 Hz Output data Output nominal voltage range 3 V DC ... 33 V DC Limiting continuous current 3 A (see derating curve) Maximum inrush current 15 A (10 ms) Voltage drop at max. limiting continuous current ≤ 200 mV Output circuit 2-wire, floating Type of protection Protection against polarity reversal Surge protection Protective circuit/component Polarity protection diode Connection data Connection method Push-In connection Stripping length 8 mm Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 General data Width 6.2 mm Height 80 mm Depth 94 mm Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -25 °C ... 70 °C Mounting position Any Assembly instructions In rows with zero spacing PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 2 / 6 18-Nov-2011 PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368 Operating mode 100% operating factor Inflammability class according to UL 94 V0 Pollution degree 2 Surge voltage category III Certificates Certification CUL, CUL Listed, GL, UL, UL Listed Accessories Item Designation Description 0801762 NS 35/ 7,5 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm 0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801377 NS 35/ 7,5 V2A UNPERF 2000MM DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver 1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm 1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m 1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm 1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m 1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m 2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Assembly PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 3 / 6 18-Nov-2011 PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368 Bridges 2966812 FBST 6-PLC BU Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue 2966825 FBST 6-PLC GY Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray 2966236 FBST 6-PLC RD Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red 2967688 FBST 8-PLC GY Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray 2966692 FBST 500-PLC BU Continuous plug-in bridge, Length: 500 mm, Color: blue 2966838 FBST 500-PLC GY Continuous plug-in bridge, Length: 500 mm, Color: gray 2966786 FBST 500-PLC RD Continuous plug-in bridge, Length: 500 mm, Color: red 2966605 OPT-60DC/ 24DC/ 2 Pluggable miniature optocouplers, power optocouplers, input: 60 V DC, output: 3-33 V DC/3 A 2966508 PLC-ESK GY Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 1051016 ZB 6,LGS:FORTL.ZAHLEN Zack marker strip, 10-section, printed horizontally: with the numbers 1 - 10, 11 - 20 and so on up to 491 - 500, color: white 5060935 ZB 6/WH-100:UNBEDRUCKT Zack strip, unprinted: For individual labeling with M-PEN, ZB-T or CMS system, large batch, sufficient for labeling 1000 terminal blocks, for a terminal width of 6.2 mm, color: White 1051003 ZB 6:UNBEDRUCKT Zack strip, unprinted, strips with 10 labels for individual labeling with M-PEN or CMS system, for terminal block width: 6.2 mm, color: white SZF 1-0,6X3,5 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip General Marking Tools 1204517 PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 4 / 6 18-Nov-2011 PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368 Drawings Diagram Circuit diagram PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 5 / 6 18-Nov-2011 PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900368 Address PHOENIX CONTACT Ltd Halesfield 13 Telford / Shropshire / TF7 4PG,England Phone 01952 681 700 Fax 01952 681 799 http://www.phoenixcontact.co.uk Phoenix Contact Ltd. Technical modifications reserved; PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 6 / 6 18-Nov-2011